CHIRURGIA

Majzoub Z, Cordioli G, Aramouni PK, Vigolo P, Piattelli A: “Guided bone regeneration using demineralized laminar bone sheets versus GTAM membranes in the treatment of implant-associated defects. A clinical and histological study”, Clin Oral Impl Res 1999; 10:406-414.

ENDODONZIA

Graiff L, Rasera L, Calabrese M, Vigolo P. Bonding effectiveness of two adhesive luting cements to glass fiber posts: pull-out evaluation of three different post surface conditioning methods. Int J Dent 2014; 2014: 148571.

IMPLANTOLOGIA

Vigolo P, Millstein PL, Aramouni P: “Evaluating master cast techniques for multiple implant abutment prostheses” (abstract), J Dent Res 1992; 71:77.
Vigolo P, Millstein PL: “Evaluation of master cast techniques for multiple abutment implant prostheses”, Int J Oral Maxillofac Implants 1993; 8:439-446.
Vigolo P: “Valutazioni di materiali da impronta, modalità d’impronta e tecniche per lo sviluppo dei modelli di lavoro in protesi implantologica”, Rivista Italiana di Osteointegrazione 1993; 4:27-37.
Vigolo P, Millstein PL: “Valutazione delle tecniche di approntamento del modello principale per implantoprotesi su pilastri multipli”, Quintessence International 1994; 1:7-14.
Vigolo P, Givani A: “Clinical evaluation of single-tooth mini-implant restorations: A five-year retrospective study”, J Prosthet Dent 2000, 84:50-4.
Vigolo P, Majzoub Z, Cordioli G: “Measurement of the dimensions and abutment rotational freedom of gold machined 3i UCLA-type abutments in the as-received condition, after casting with a noble metal alloy and porcelain firing”, J Prosthet Dent 2000, 84:548-53.
Vigolo P, Majzoub Z, Cordioli G: “Evaluation of the accuracy of three techniques used for multiple implant abutment impression”, J Prosthet Dent 2003, 89:86-192 .
Vigolo P, Givani A, Majzoub Z, Cordioli GP: “Cemented vs. screw-retained implant-supported single tooth crowns: A four-year prospective clinical study.” Int J Oral Maxillofac Implants 2004, 19:260-265.
Vigolo P, Givani A, Majzoub Z, Cordioli GP: “Clinical evaluation of small-diameter implants in single-tooth and in multiple implant restorations: A seven-year retrospective study.” Int J Oral Maxillofac Implants 2004, 19:703-709.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “An evaluation of impression techniques for multiple internal connection implant prostheses.” J Prosthet Dent 2004, 92: 470-476.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “An “in vitro” evaluation of ZiReal abutments with hexagonal connection: as received and following abutment preparation.” Int J Oral Maxillofac Implants 2005, 20:108-114.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “Master cast accuracy in single tooth implant replacement cases: an “in vitro” comparison. A Technical Note.” Int J Oral Maxillofac Implants 2005, 20:455-460.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “Precision in treatment of cemented prosthetic cases on implants: clinical and technical considerations.” JLDA 2005; 42:31-37.
Vigolo P, Givani A, Majzoub Z, Cordioli GP: “A 4-year prospective study to assess peri-implant hard and soft tissues adjacent to titanium versus gold-alloy abutments in cemented single implant crowns.” J Prosthodont 2006; 15:250-256.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “An “in vitro” evaluation of Titanium, Zirconia and Alumina Procera abutments with hexagonal connection.” Int J Oral Maxillofac Implants 2006; 21:575-580.
Vigolo P, Fonzi F, Majzoub Z, Cordioli GP: “Evaluation of gold-machined UCLA-type abutments and CAD/CAM titanium abutments with hexagonal external connection and with internal connection.” Int J Oral Maxillofac Implants 2008; 23:247-252.
Vigolo P, Givani A: “Platform-switched restorations on wide-diameter implants: a 5-year clinical prospective study.” Int J Oral Maxillofac Implants 2009; 24: 103-109.
Aramouni P, Vigolo P, Majzoub Z, Zebouni E, Salameh Z, Almas K: “Evaluation of rotational freedom of In-Ceram ceramic blank abutments before and after infiltration.” Implant Dent 2010; 19:50-56.
Vigolo P, Zaccaria M: “Clinical evaluation of marginal bone level change of multiple adjacent implants restored with splinted and non-splinted restorations: a 5-year prospective study.” Int J Oral Maxillofac Implants 2010; 25: 1189-1194.
Graiff L, Vigolo P: “Replacement of a hopeless maxillary central incisor: a technique for the fabrication of an immediate implant-supported interim restoration.” Quintessence Int 2012; 43:273-277.
Gracis S, Michalakis K, Vigolo P, Vult von Steyern P, Zwahlen M, Sailer I: “Internal vs. external connections for abutments/reconstructions: a systematic review.” Clin. Oral Implants Res 2012; 23 (Suppl. 6):202-216.
Vigolo P, Mutinelli S, Givani A, Stellini E: “Cemented versus screw-retained implant-supported single-tooth crowns:a 10-year randomised controlled trial.” Eur J Oral Implantol 2012; 4: 355-364.
Graiff L, Vigolo P. Sostituzione di un incisivo centrale superiore perso: tecnica per la fabbricazione di un provvisorio immediate supportato da impianto. Implantologia 2013; 1: 25-29.
Prisco R, Santagata M, Vigolo P. Effect of aging and porcelain sintering on rotational freedom of internal-hex one-piece zirconia abutments. Int J Oral Maxillofac Implants 2013;28:1003-1008.
Vigolo P, Mutinelli S, Fonzi F, Stellini E. An in vitro evaluation of impression techniques for multiple internal and external connection implant prostheses. Int J Oral Maxillofac Implants 2014; 29:807-818.
Biscaro L, Ferlin P, Becattelli, A, Vigolo P. Prosthetic procedure for simultaneous immediate loading of opposing edentulous arches. J Prosthet Dent J Prosthet Dent 2014; 112:713-716.
Vigolo P, Mutinelli S, Zaccaria M, Stellini E. Clinical evaluation of marginal bone level change of multiple adjacent implants restored with splinted and non-splinted restorations: a 10-year randomised controlled trial. Int J Oral Maxillofac Implants 2015; 30:411-418.

PARODONTOLOGIA

Guided bone regeneration using demineralized laminar bone sheets versus GTAM membranes in the treatment of implant-associated defects.A clinical and histological study. Majzoub Z, Cordioli G, Aramouni PK, Vigolo P, Piattelli A
Surgical template for crown lengthening: A clinical report Fabio Scutella, Luca Landi, Girolamo Stellino, Steven M. Morgano
Il restauro conservativo dell’area cervicale: protocolli operativi Le rapporti con il parodonto Mario Alessio Allegri, Luca Landi, Giovanni Zucchell

PROTESI

Aramouni P, Millstein PL, Vigolo P: “The influence of die systems and die stone upon die position” (abstract), J Dent Res 1992; 71:1140.
Musajo F, Passi P, Zadro A, Vigolo P, Petrelli I, Fanci P: “Sensibilità orale ed adattamento alla protesi rimovibile”, Atti del 3° Simposio Nazionale S.I.O.G., Padova, 1993, 145-150.
Graiff L, Vigolo P: “L’utilizzo del Post Buster per la rimozione di perni moncone fusi nella pratica clinica”, G It Endo 1997; 2:74-78.
Vigolo P, Graiff L, Mutinelli S, Fonzi F: “Porcelain inlays cemented with composite resin cement: an in vivo investigation on pulpar reaction one year following cementation.” J Prosthodont 2007; 16:123-128.
Graiff L, Piovan C, Vigolo P, Mason PN: “Shear bond strength for two adhesive cements between feldsphatic CAD/CAM ceramic and human dentine.” J Prosthodont 2008; 17: 294-299.
Vigolo P, Fonzi F: “An “in vitro” evaluation of fit of zirconium-oxide based ceramic four-unit fixed partial dentures, generated with three different CAD/CAM systems, before and after porcelain firing cycles and after glaze cycles.” J Prosthodont 2008; 17: 621-626.
Prisco R, Cozzolino G, Vigolo P: “Dimensional accuracy of an epoxy die material using different polymerization methods.” J Prosthodont 2009; 18: 156-161.
Vigolo P, Motterle M: “An in vitro evaluation of zirconia surface roughness caused by different scaling methods.” J Prosthet Dent 2010; 103:283-287.
Vigolo P, Mutinelli S: “Evaluation of Zirconium-Oxide-Based Ceramic Single-Unit Posterior Fixed Dental Prostheses (FDPs) Generated with Two CAD/CAM Systems Compared to Porcelain-Fused-to-Metal Single-Unit Posterior FDPs: A 5-Year Clinical Prospective Study.” J Prosthodont 2012; 21: 265-269.
Biscaro L, Bonfiglioli R, Soattin M, Vigolo P:. “An “in vivo” evaluation of fit of zirconium-oxide based ceramic single unit fixed partial dentures (FPDs), generated with two different CAD/CAM systems, in comparison to porcelain-fused-to-metal single unit FPDs.” J Prosthodont 2013; 22: 36-41.
This is a pretty list item
Broseghini C, Broseghini M, Gracis S, Vigolo P. Aesthetic functional area protection concept for prevention of ceramic chipping with zirconia frameworks. Int J Prosthodont 2014; 27:174-176.